Accessories

AEKE crossbar Unloader or Resistance Controller not working

AEKE K1 & AEKE S1 Pro1 min read
Quick answer

If it's new, open the back cover and remove the battery insulating tab. Otherwise, replace the CR2032 button battery. Then briefly press the button and tap the pairing prompt on the screen.

How to fix it

  1. New unit: open the back cover and check that the battery insulating tab has been removed.
    AEKE Unloader with the back cover removed, showing the CR2032 battery compartment
    AEKE Unloader with the back cover removed, showing the CR2032 battery compartment
  2. Older unit: replace the CR2032 button battery. It isn't rechargeable. The first battery lasts about 3 months, and a battery lasts about 5,000 uses.
  3. Briefly press the button. When the light turns on, tap the pairing prompt on the screen.
  4. Attach the two round buckles to the Cross-bar and lock the Unloader firmly in place before training.
    AEKE crossbar with the two circular buckles and the Unloader attached
    AEKE crossbar with the two circular buckles and the Unloader attached

Watch: attaching the crossbar and Resistance Controller

Attach the crossbar and Resistance Controller (AEKE S1 Pro, 0:23)

Still not fixed?

If it still won't turn on with a new battery, contact us with your order number.

Please include:

  • Order number
  • A photo of the unit with the cover open

If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.