Accessories

AEKE K1 handles (Smart Grips) not connecting or charging

AEKE K12 min read
Quick answer

Charge the grips with a USB-C cable (about 4 hours). To reset a grip, hold its button until it vibrates and the light turns off, wait a moment, then turn it back on and reconnect from the Bluetooth toolbar.

Attach or remove a grip

  1. Press the button on the cord-lock and insert the grip's square buckle into the slot at the end of the cord.
  2. Check that it's securely attached.
  3. To remove it, press the cord-lock button and separate the grip.
Attaching a K1 Smart Grip: press the cord-lock button and insert the square buckle
Attaching a K1 Smart Grip: press the cord-lock button and insert the square buckle

Indicator lights

  • White light flashing: on and ready to pair, or disconnected
  • Green light flashing: connected
  • Green light pulsing: charging
  • Green light steady: fully charged

Grips turn off automatically after 5 minutes without use.

Pair with the K1

  1. Pull down the Bluetooth toolbar on the K1.
  2. Press the grip button until the grip vibrates and the white light flashes.
  3. Tap the grip when it appears.

Grip won't connect, vibrates or won't charge

  1. Hold the grip's button to turn it off, wait a moment, then turn it on again.
  2. Charge it from the USB port on the back of the K1, or with any USB-C cable. Fast charging isn't supported, so allow about 4 hours.

Still not fixed?

If the grip still won't connect or charge, contact us with your order number and a video.

Please include:

  • Order number
  • A video showing the issue

If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.