How to charge and connect the AEKE heart rate armband
Charge it before first use with the supplied cable and a DC 5 V adapter. Wear it on your upper arm near the inner elbow, hold the power button until the LED flashes green, then select Heart Rate Armband in the machine's Bluetooth menu.
Charge it
- Charge it before first use with the supplied magnetic charging cable and a DC 5 V power adapter.
- While it charges, the red and green lights flash alternately.
- When the green light stays on, it's fully charged.
Wear it
- Wear it on the upper arm, close to the inner elbow.
- Your heart rate appears within about 15 seconds. Once valid data is detected, the green light changes from fast to slow flashing.
Pair it with your machine
- Press and hold the power button on the armband until the LED flashes green.
- Swipe down from the top of the machine's screen and tap the Bluetooth icon.
- In the window that appears, select Heart Rate Armband.
Auto power-off
If no heart rate data is detected for more than 90 seconds, the armband turns off automatically.
Take the sensor out of the strap
Press the front of the sensor to remove it. To put it back, line up the raised part with the slot and press until it snaps into place.
The armband is a fitness aid and doesn't replace medical advice.
Still not fixed?
If the armband won't charge or pair, or the charging cable isn't in your box, contact us.
Please include:
- Order number
- Which step doesn't work (charging, lights or pairing)
If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.
