Accessories

AEKE smart scale not working? Reset, connect, change units

AEKE K1 & AEKE S1 Pro2 min read
Quick answer

To reset, remove the battery cover and press the pinhole with a SIM pin for 5–10 seconds until “CLR” shows. The scale uses your account's units, so change kg/lb in Settings > Units. “L0” means the batteries are low.

Scale won't connect: reset it

  1. Remove the battery cover to wake the scale.
  2. Press the small pinhole with a SIM ejector pin or similar for 5–10 seconds until CLR appears.
  3. Open Body Composition on the machine or app and connect again.
Underside of the AEKE Smart 8-Electrode Scale with the battery compartment and reset pinhole highlighted
Underside of the AEKE Smart 8-Electrode Scale with the battery compartment and reset pinhole highlighted

Change kg / lb

The scale follows your account's unit setting. Connect it to your machine or the AEKE app, then go to Settings > Units and choose metric or imperial.

AEKE machine Settings screen showing the Units option set to metric
AEKE machine Settings screen showing the Units option set to metric

Measurement fails or looks wrong

  1. Open the measurement screen.
  2. Pull and hold the grips.
  3. Stand barefoot on the electrodes.
  4. Wait until you hear “Body Fat Measurement Complete” or the report appears.

If the result looks wrong, check that your height and units are correct in your profile preferences, then measure again.

Scale won't turn on

If the display shows L0 or stays blank, replace the 4 AA batteries.

Still not fixed?

If the scale still won't turn on with new batteries, or readings stay wrong, contact us with the scale's serial number (on the scale's label) and a photo of the result.

Please include:

  • Order number
  • Scale serial number
  • A photo of the result screen

If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.