Accessories

AEKE S1 Pro Pin Unloader not connecting? Batteries and fixes

AEKE S1 Pro2 min read
Quick answer

The Pin Unloaders ship without batteries. Open each cover with the L-shaped hex key from the accessory box, insert one battery, close it, then touch the electrode: the blue light should turn on.

Watch the on-screen tutorial

Go to Home > Lifestyle > User Guide and open Insert the Battery into the Pin. First-time users also see it during setup. The Pin Unloaders are the Height Adjustment Pins (R/L) on the left and right arms.

Install the batteries

You need the L-shaped hex key and batteries from the accessory box. Each Pin Unloader takes one battery.

  1. Remove the Pin Unloader cover with the hex key. Don't try to open it by hand; it is tightly secured.
  2. Insert one battery, matching the polarity marks in the compartment.
  3. Put the cover back and tighten it.
  4. Touch the electrode area. The blue indicator light should turn on.

Pin Unloader won't connect

  1. Check whether the problem affects one or both Pin Unloaders.
  2. Touch the metal contact on each one. If the blue light doesn't turn on with a battery installed, that unit may be faulty — contact us.
  3. If the light works, take the battery out, wait a few seconds, put it back and try connecting again.

Firmware update for the Pin Unloader fails

The update is sent over Bluetooth, not Wi-Fi. Start the update again and, when it reaches Installing, gently touch the metal contacts on both Pin Unloaders to keep the Bluetooth connection active.

Still not fixed?

If a Pin Unloader still won't connect, or connects and drops, send a fault report and contact us.

Please include:

  • Serial number (SN)
  • Which Pin Unloader (left, right or both)
  • A video of the indicator light

If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.