Setup & Power

How to turn on, restart or shut down your AEKE K1 or S1 Pro

AEKE K1 & AEKE S1 Pro3 min read
Quick answer

Turn on the main power switch at the bottom of the back of the unit, then press the power button on the side. A short press puts the screen in standby; if the screen freezes, hold the button to force a shutdown (10+ seconds on the K1, 5+ seconds on the S1 Pro).

Where the buttons are (K1)

The power button and the footboard button are on the side of the K1. The power port (10), USB port (11), caster wheels (12) and main power switch (13) are at the back.

Rear of the AEKE K1 with the power port, USB port, main power switch and caster wheels numbered
Rear of the AEKE K1 with the power port, USB port, main power switch and caster wheels numbered

Where the buttons are (S1 Pro)

The screen power button is on the side of the screen. The cooling vents (4), USB port (5), main power switch (6) and caster wheels (7) are at the back.

Rear of the AEKE S1 Pro with the USB port, main power switch, cooling vents and caster wheels numbered
Rear of the AEKE S1 Pro with the USB port, main power switch, cooling vents and caster wheels numbered

Power on

  1. Plug the original power cord into a properly grounded wall outlet.
  2. Turn on the main power switch at the bottom of the back of the unit.
  3. Press the power button on the side of the screen. On the K1, hold it for about 3 seconds until the AEKE logo lights up.

Standby and wake

Briefly press the side power button to turn the screen off (standby). Press it briefly again to wake the screen.

Restart or force power-off (S1 Pro)

  • Restart: press and hold the power button for 2–5 seconds, then choose Restart in the menu that appears.
  • Force power-off: press and hold the power button for 5 seconds or longer.

If the screen freezes or does not respond

  1. Force a shutdown: on the K1, press and hold the side button for 10 seconds or longer; on the S1 Pro, press and hold the power button for 5 seconds or longer.
  2. Wait 30 seconds.
  3. Press and hold the power button for 3 seconds to restart.

Power off completely

Make sure the footboard is fully folded and the screen is off, then turn off the main power switch on the back. When you won't use the machine for a while, for example after an evening workout, we recommend powering it off instead of leaving it in standby.

Still not fixed?

If the machine does not power on at all, contact us with your order number and a short video.

Please include:

  • Order number
  • Serial number (SN), if the screen turns on
  • A short video showing what happens

If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.