AEKE K1 screen freezing or touch screen not responding
Shut the K1 down completely, wait 30 seconds and restart. If touch is unreliable, try another wall outlet without a power strip; static or grounding can affect touch response.
Lagging, freezing or restarting by itself
- Hold the side button for 10+ seconds to shut down, wait 30 seconds, then hold the power button for 3 seconds to restart.
- When you won't train again soon, power the K1 off instead of leaving it in standby.
- If it happens again, send a fault report right after the problem.
Touchscreen not responding accurately
Because the K1 plugs straight into a wall outlet, static electricity or the outlet's grounding can affect touch. Try this quick test:
- Touch the metal frame of the K1 with one hand.
- Use the touchscreen with your other hand.
- If the screen works noticeably better, the cause is likely grounding or static rather than a hardware fault.
Then:
- Plug the K1 into a different wall outlet.
- Plug it directly into the wall, without a power strip or extension cord.
- If you can, check the outlet's ground with a socket tester.
Keep the screen clean
Power off before cleaning. Use a damp cloth or an alcohol-based wipe, and make sure the screen is completely dry before you turn it back on, otherwise touch sensitivity can be affected. Avoid striking or pressing hard on the touchscreen; it can crack.
Still not fixed?
If the screen still freezes or misreads touches, contact us after sending a fault report.
Please include:
- Order number
- Serial number (SN)
- A video of the issue
If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.
