AEKE K1 handles (Smart Grips) not connecting or charging
Quick answer
Charge the grips with a USB-C cable (about 4 hours). To reset a grip, hold its button until it vibrates and the light turns off, wait a moment, then turn it back on and reconnect from the Bluetooth toolbar.
Attach or remove a grip
- Press the button on the cord-lock and insert the grip's square buckle into the slot at the end of the cord.
- Check that it's securely attached.
- To remove it, press the cord-lock button and separate the grip.

Indicator lights
- White light flashing: on and ready to pair, or disconnected
- Green light flashing: connected
- Green light pulsing: charging
- Green light steady: fully charged
Grips turn off automatically after 5 minutes without use.
Pair with the K1
- Pull down the Bluetooth toolbar on the K1.
- Press the grip button until the grip vibrates and the white light flashes.
- Tap the grip when it appears.
Grip won't connect, vibrates or won't charge
- Hold the grip's button to turn it off, wait a moment, then turn it on again.
- Charge it from the USB port on the back of the K1, or with any USB-C cable. Fast charging isn't supported, so allow about 4 hours.
Still not fixed?
If the grip still won't connect or charge, contact us with your order number and a video.
Please include:
- Order number
- A video showing the issue
If a fault could be unsafe, don't repeat it just to record a photo or video; send what you already have.
