You don't need a bench for a solid chest session. On a smart home gym, a standing cable chest press and standing cable fly variations can train your chest. That only holds if your machine can set the cables where each move needs them and you can stay stable while you control the full range.

Below are three supported options, then a check you can run on your own machine before you add resistance.
No-Bench Press and Fly Options
Three standing variations come from established exercise libraries: one press and two flies. Each one lists chest as its target. Each one also assumes a specific cable setup, so treat them as options to check against your machine, not moves every smart gym can handle.
| Variation | What the movement looks like | Cable setup it assumes |
|---|---|---|
| Standing cable chest press | Press handles forward from beside the chest until the arms are straight, then return | Two shoulder-height cable points, one handle per side |
| Standing chest fly | Arms start out to the sides and come together in front with a slight elbow bend | Two cable points slightly above shoulder height, two handles |
| Standing decline cable fly | Arms sweep down and in until the hands meet below chest level | Two handles starting about level with the top of the head |
Standing cable chest press. ExRx lists the Cable Isolateral Standing Chest Press in its chest library. It names the sternal (lower and middle) part of the pectoralis major as the target muscle. The front of the shoulders and the triceps assist. You stand facing away from the cable points, holding a stirrup handle at each side of your chest with your elbows out. You step into a lunge, press forward until your arms are straight, then return until you feel a slight stretch in your chest or shoulders. ExRx also notes that the hands follow a slight arc as they move closer together. It says the pulleys work best set closer together than a typical cable crossover station.
Standing chest fly. The American Council on Exercise (ACE) classifies its standing chest fly as a chest exercise. You set two pulleys slightly above shoulder height, hold one handle in each hand, and step forward so your arms reach out to the sides. Keeping a slight bend in your elbows, bring your hands together in front of you. Pause for one second, then return slowly. ExRx also lists a similar move, the Cable Isolateral Standing Fly, if you want a second reference for this pattern.
Standing decline cable fly. ACE's standing decline cable flyes are also listed as a chest exercise. They start higher: handles about level with the top of your head. From a staggered stance with a braced core, your arms sweep down and forward until your hands meet just below chest level. Then they open slowly back out.
None of these sources ranks one move above the others. Choose based on which cable positions your machine supports and which move you can control well. For more ideas, including bodyweight options, see our guide to training chest without a bench press and our roundup of bench press alternatives.
Check the Setup for Your Machine
Use a variation only when your exact machine can place the cables where the move needs them and you can stay balanced through every rep. Exercise library pages explain movement mechanics rather than smart-gym hardware support, so check the documentation for your specific model before loading up.
- Find the move in your machine's documentation. Look in the manual or the built-in exercise library for the cable positions and attachments your model supports. Our guide on how to check exercise support walks through matching each planned move to a model's documented setup.
- Confirm the cable height and handle count. The press needs two cable points at shoulder height with a handle on each side. The standard fly needs two points slightly above shoulder height and two handles. The decline fly needs handles that start about level with the top of your head. If your machine can't reach a height or only gives you one handle, skip that variation. Our smart cable gym buying guide covers the specs, including attachments, that decide what a machine can set up.
- Set your stance before you load up. For the press, step into a lunge with one foot forward and bend the front knee. For the decline fly, ACE calls for a staggered, walking-style stance, a braced core, and an upright trunk without arching your low back.
- Control the range in both directions. On the flies, keep a slight elbow bend and wrists in line with your forearms. On the decline fly, ACE says not to let your hands travel back past armpit level as your arms open. On the press, stop the return when you feel a slight stretch.
- Lower the resistance if you start to lean. ACE warns that leaning forward on the decline fly adds stress to the shoulder joint. This often happens when the load is too heavy. Lower the resistance and stand tall again.

Use the same balance test for every variation. If the cables pull you off balance, or you can't slow the return, reduce the resistance or switch to another setup your machine supports. A lighter set you can control is a usable chest exercise. A heavier set that drags you forward is not.
FAQs
Can I build a full chest workout without a bench?
You can cover both pressing and fly patterns standing up. Pair a standing cable chest press with one of the fly variations if your machine supports the cable heights each one needs. Planning sets, reps, and weekly volume is beyond this article, so follow your machine's programs or a coach's plan for that.
Do I need two cables for these exercises?
As written, yes. All three sources describe two cable points with a handle in each hand. If your machine has only one cable, these setups as described won't match it. ACE does list a one-arm version of the decline fly as a progression, done while avoiding any trunk rotation.
Why do I keep leaning forward during cable flies?
ACE notes this often happens when the resistance is too heavy, and it increases stress on the shoulder joint. Lower the load, use a staggered stance, brace your core, and keep your trunk vertical.
How can I make the standing decline fly harder without adding weight?
ACE lists several progressions: bring your feet together, stand on one foot, or work one arm at a time. Each one asks more of your balance, so use them only after you can control the standard version from a staggered stance.
